• Vai al sito in italiano
SPAP SYSTEM

BODY FILLER

Body Filler
BODY FILLER

PRIMER

Primer
PRIMER

WATER BASE

Water Base
WATER BASE

CLEAR LACQUER

Clear Lacquer
CLEAR LACQUER

SPAP DRYTRON

SPAP drytron
SPAP DRYTRON
SPAP SYSTEM
SPAP - Symach Paint Application Process - represents the proper painting method that integrates the use of both Drytronic technology and the robot.

Since it dries the paint in just a few seconds, the Drytronic technology enabled us to develop a painting process that significantly reduces flash-off times, as the robot performs the process even faster.

Drytronic drying quality - is superior to any other drying process involving the use of hot air ovens or electric infrared heaters, because reticulation is instantaneous and 100% complete. The painting product is chemically stable and inert. This prevents the appearance of any future defects, while at the same time allowing for immediate sanding and polishing. The SPAP application and drying process - is ideal for all painted products and for any brand name, even using different drying formulas, all while fully complying with the indications provided on the manufacturer’s technical data sheet. The time required to apply the paint to the products is reduced by 60% to 70%, while drying time is reduced by 80% to 90% with respect to any conventional system.
Body Filler - this application and drying process allows for filling operations to be completed with a single application, offering superior compactness and quality with respect to the application of two coats using the traditional cycle, in less than half the time. For example, the continuous and uninterrupted filler application and drying takes place in less than five minutes.



BODY FILLER
Body Filler

PRIMER
Primer
Primer - the Undercoat application process is carried out without interruption, because the flash-off between coats is performed by the robot. For example, the application and drying of three coats of Undercoat can be performed in less than eight minutes. Drytronic technology even allows for the Undercoat to be applied using a roller, in thicknesses and with application and drying times identical to that of spray applications, but with a 60% savings in paint product and a 100% savings in terms of masking times and materials.


Water base - depending on the brand, the application of the two or three coats takes place consecutively and without interruption. For example, less than six minutes are required for application and drying of three painted panels.



WATER BASE
Water base

CLEAR LACQUER
trasparente
Clear lacquer - the application of two coats takes place consecutively and without interruption. For example, in order to paint three panels, less than twelve minutes are required for application and drying.


 
youtube facebook
News
Gary Lyons SYMACH
September 2017
READ
Symach FixStation Installation Supports Carglass®’s Plans to Expand Into Auto Body Repair
Gary Lyons SYMACH
September 2017
READ
Gary Lyons New SYMACH Project Manager North America
Future Center Symach
September 2017
READ
Symach’s Future Center in Bologna, it hosted the Companies: AKZO NOBEL, BASF and The Sherwin-Williams
European Auto Body
July 2017
READ
Another successful Symach project: European Auto Body
CSN Blue Mountain Collision
July 2017
READ
CSN Blue Mountain Collision opened a 10,700-square-foot Symach equipped shop in Collingwood, Ontario, Canada
Nace Automechanika
July 2017
READ
SYMACH to Host Info Session at NACE Automechanika
news
May 2017
READ
CSN Blue Mountain Collision in Ontario Builds New Shop with Symach FixLine System
Autopromotec 2017
May 2017
READ
SYMACH to Host Open House During AUTOPROMOTEC
© 2016 | Symach srl All Rights Reserved
Back to top