Portable infrared drying lamp for spot repairs
DryTron is a portable paint and body filler infrared drying tool that uses DryTronic technology. Body filler, primer and waterborne dry in as little as 40 seconds; clear coat dries in as little as 80 seconds.
DryTron portable infrared drying lamp for spot repair
It is ideal for drying small spot repairs, for example the size of an A3 sheet of paper (11.69 in x 16.54 in).
In addition, it also works well when temperature is fundamental to the treatment, thanks to its built-in laser for measuring the temperature. During the drying treatment, the technician can easily check the temperature and make adjustments as needed.
The DryTron is cordless: it works using a 200 grams or 0.44 pounds canister of gas, such as camping gas and it’s ready for use after an initial two-minute warm up.
This drying lamp is divided into two pieces; one is the radiant panel used to dry and the second one is the base used for the electric activation of the catalyst.
Drytron lamp is perfect for drying electric vehicle paint:
DryTronic Infrared technology is the gentle way to refinish electric cars that have sensitive electronics systems; it’s ideal for EVs and hybrids, minimizing the impact on the battery and EV components.
Discover our wide range of bodyshop equipment and the FixLine system.
DRYING PERFORMANCE
The DryTron dries every brand and type of paint in less than a minute and a half.
Body Filler 40 seconds time
Primer 40 seconds time
Waterborne 50 seconds time
Clear coat 80 seconds time
The time previously mentioned can change depending on the brand of paint and during the winter summer climates.
CONFIGURATION
The DryTron is composed of two pieces: the first one is the DryTron drier catalytic panel, and the second one is the base for starting the catalytic reaction.
DRYTRONIC PANEL
The DryTronic panel produces a catalytic chemical reaction that generates infrared waves in a specific range of length, that permits it to dry paint in less than a minute and a half. This energy is harmless to the human health.
TEMPERATURE READING LASER
The DryTron has a built-in laser to read the temperature on the painted surface. During the drying treatment, the technician uses it to respect the drying temperature, as part of the Symach procedure.
GAS CANISTER
The DryTron uses a canister of 200 g or 0,44 lb to produce the DryTronic catalytic infrared. The canister is sufficient for two-and-a-half hours of drying. Considering that the drying treatment takes just a few minutes, it is usable for many different dryings.
