The FlyDry Hybrid (FDH) is a drying robot that produces coatings for car body shops. It uses
IR-Drytronic technology and UVA-LEDtronic technology can dry any part of the vehicle.
It is usually installed in several preparation bays or a spray booth. The FlyDry Hybrid can dry body filler, primer, waterborne basecoat, and clearcoat.
The FDH is composed of an overhead crane and an automatic column that can rotate 360°,
moving automatically on all sides and horizontal sections of the vehicle.
It features an arm equipped with two IR-Drytronic lamps and two UVA LEDtronic lamps, covering an area of approximately 2 m. (6 ’6 ¾”) in height, for a possible movement as long as the work area. This automatic movement allows the entire car side to be dried in a single pass.
The FDH has two technologies for drying:
The FDH can be used in several preparation bays, from one to a maximum of four, or it can be installed in a spray booth.
The robotic column can raise and lower the pneumatic arm that carries the lamps, IR, and UVA; it can run automatically in every direction within the work area, covering the vehicle’s width and length, and drying both vertical and horizontal surfaces.
| IR Technology | Cathalytic Infrared Drytronic | |
| Option UVA technology | UVA LEDtronic | |
| Drying methodology | Automatic moving | 30:00 minutes |
| Configurable drying programs | 99 | |
| Drying car limit size vertically | m. 1.8 | Ft. 5.9 |
| Drying car limit size in length | m. 6.0 | Ft. 19.7 |
| PAINT PRODUCTS* | DRYING SPEED | DRYING SPEED |
|---|---|---|
| Body Filler | 80 cm/minute | 32 In/minute |
| Wet on Wet Sealer | 100 cm/minute | 39 In/minute |
| Primer | 80 cm/minute | 32 In/minute |
| Waterborne | 80 cm/minute | 32 In/minute |
| Clear coat | 60 cm/minute | 24 In/minute |
| Electronic board | Private owned |
| Keyboard | Membrane |
| Display | 2X20 Digit |
| Moving colum two direction | Electric motor |
| Moving lamp up and down | Pneumatic |
| Rotation 360° | Manual |
| m. | ft. | |
|---|---|---|
| Internal length | 8,00 | 26,25 |
| Internal width (one preparation bay) | 4,00 | 13,12 |
| Option internal width (four preparation bay) | 16,00 | 52,50 |
| Internal height | 3,00 | 9,84 |
| Option internal height | 3,50 | 7,72 |
| IR Drytronic panel | 2 | |
| IR Drytronic panel size | cm. 85X40 | In. 33.5X15.8 |
| Fuel | Natural Gas or LPG | |
| Power output | 11 Kw/h *2 | 38.000 BTU/h *2 |
| Hurly consumption Natural gas | 1.1 Mc/h *2 | 0.64 CFM/h *2 |
| Hurly consumption LPG | 0.65 Kg/h *2 | 1.43 Lb/h *2 |
| Option UVA LEDtronic panels | 2 | |
| Option UVA LEDtronic double line *2 | cm. 85X10 *2 | In. 33.5X 3.0 *2 |
| Power | 0.55 Kw/h | 0.75 HP |
| Wavelength | 485 nm |
Symach srl RD 25 
